default epg (from tv source) settings?

[waterwave]

Have a nice day everyone.

I have a question. I noticed the following in the log file of my hdhomerun 4 tuner device (tunerip:port website):

20190504-02:46:12 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:46:23 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:46:23 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:48:24 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:48:24 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:48:35 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:48:35 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:50:36 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:50:36 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:52:37 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:52:37 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:54:38 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:54:38 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:56:39 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:56:40 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-02:58:40 Tuner: tuner0 rtp stream ended (stop request)
20190504-02:58:41 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:00:41 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:00:42 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:02:42 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:02:43 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:04:43 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:04:44 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:04:54 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:04:55 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:05:05 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:05:06 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:05:16 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:05:17 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:05:27 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:05:28 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:07:28 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:07:29 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:07:39 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:07:40 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:07:50 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:07:51 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:09:51 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:09:52 Tuner: tuner0 streaming rtp to 192.168.3.120:59287
20190504-03:11:52 Tuner: tuner0 rtp stream ended (stop request)
20190504-03:11:53 Tuner: tuner0 streaming rtp to 192.168.3.120:59287

21-22 times, always, every 6 hours.
I suspect the TVmosaic should be resolved to not show it because I really think it is superfluous. (setup - epg - sources - default epg). My question is, could it be turned off in the log or could it not be solved so that the default epg part also has a setup switch?

[waterwave]

Someone?

[Oberon]

Default EPG in your case is EPG from the stream. TVMosaic needs to scan stream for this EPG data.
What is exactly the issue that you have?

[waterwave]

Would I have wondered if the lines in the above log can be displayed?
So not to display the 4 tuner device. Or is it not possible?

[waterwave]

Where can I turn off the log I wrote above?

[Oberon]

Where can I turn off the log I wrote above?

Most probably, somewhere inside the HDHomeRun settings.

[waterwave]

There's no such thing there. This is done by the tv mosaic program every 6 hours for the hdhomerun device.

[Oberon]

This is not the TVMosaic log. It is a log of some other thing (hdhomerun?). Yoh need to turn it off there.

[wazer]

There's no such thing there. This is done by the tv mosaic program every 6 hours for the hdhomerun device.

If you do not want EPG to be downloaded from hdhomerun box to tv mosaic turn it off, I have the same logs on hdhomerun device log page

This is not the TVMosaic log. It is a log of some other thing (hdhomerun?). Yoh need to turn it off there.

Tho It would be nice to be able to decide whenever I want to pull egp data and not every X/360minutes (static locked) amount only.(most preferred be able to set schedules times your self like 6am in the morning and 22pm etc...

Would also be nice to see a check before tv mosaic starts to pull EPG, let say, if all 4 tuners are occupied, wait another 30 minutes and try again until a tuner is ready.

[Oberon]

Tho It would be nice to be able to decide whenever I want to pull egp data and not every X(static locked) amount only.(most preferred be able to set schedules times your self like 6am in the morning and 22pm etc...

This will be in the upcoming release.