Page 2 of 3

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Tue Aug 07, 2018 2:47 pm
by Plantje
I'm running Windows and NewCS. Then it is slightly different.

Open the file “dvbjcam.readers” and below the line:
“//cccam:ip:port:0/caid/mask:user:password”
add the following:
"newcamd:127.0.0.1:15050:1/0604/ffff:gebruiker1:wachtwoord1:0102030405060708090A0B0C0D0E"
Where 0604 is your card number and "gebruiker1" en "wachtwoord1" differ per tuner.

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Fri Aug 10, 2018 7:29 pm
by HomeNorway
I have now removed the cccam part in my oscam.conf.
But still nothing, I have restarted OScam and TVMosair.

Maybe my TV card is not supported, can I check that some how?

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Fri Aug 10, 2018 7:37 pm
by Plantje
Have you activated the trial or the license of TV Mosaic?

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Tue Aug 14, 2018 10:33 pm
by HomeNorway
I’m running i trial mode for now.

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Wed Aug 15, 2018 8:30 pm
by Plantje
And you have actually activated the trial?

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Thu Aug 16, 2018 6:42 pm
by HomeNorway
Yes it is activated.

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Thu Aug 16, 2018 8:17 pm
by Plantje
Ok, I'm sorry I don't have a solution. In my case the fact that I had not activated the license nor the trial was causing the fact that nothing was decrypted.

Do you have an option to watch free to air channels? Do those run? Just to make sure TV Mosaic is running fine...

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Fri Aug 17, 2018 7:02 pm
by HomeNorway
Yes I have one free Channel, and that works.
I have contacted my tv provider, and we’re trying to get a new decrypting TV card. Just to make sure there’s nothing wrong with the TV card.

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Fri Aug 17, 2018 7:04 pm
by Plantje
Do you have no other option to test the card? In my setup I have to use a card at least every three months. Otherwise it will stop working and I have to put it in a certified receiver and reset the card on a website.

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Posted: Fri Aug 24, 2018 11:55 am
by muppets4
Plantje wrote:
Fri Aug 17, 2018 7:04 pm
Do you have no other option to test the card? In my setup I have to use a card at least every three months. Otherwise it will stop working and I have to put it in a certified receiver and reset the card on a website.
Sounds like CaiWay (:

I had this too using Newcs/Acamd and a Smargo smartmouse. Every months I had to 'reset' the cards, because CaiWay thought it was inactive. I don't know why, but after I ditched the Smargo and started using a TBS Smartmouse (https://www.tbsdtv.com/products/tbs3102 ... eader.html) this behaviour stopped.