UNICABLE support

Post here your ideas on how to make TVMosaic product better
Post Reply
fm-maniac
Posts: 5
Joined: Thu Oct 11, 2018 6:59 am

UNICABLE support

Post by fm-maniac » Thu Oct 11, 2018 7:27 am

When will we get UNICABLE support with TVMosaic?

I still have to stick with DVBLink as UNICABLE systems are not supported by TVMosaic. Is it realy such an effort to realize this in TVMosaic?

Neild7744
Posts: 9
Joined: Fri Jan 25, 2019 5:24 pm

Re: UNICABLE support

Post by Neild7744 » Fri Jan 25, 2019 5:58 pm

Im using wideband unicable with 2 x SAT IP servers with TV Mosaic and it works fine.

I have a 24 feed wideband SAT IP server (from a 2 x cable wideband lnb) pointed at ASTRA 28.2 and all 24 tuners are setup and configured with TV Mosaic - it works well.

I also have 2 x wideband feeds from Astra 19.2 & Hotbird 13e via a unicable switch into a 4 x tuner SAT IP server which lets me run both satellite feeds in parallel.

All channels are customized into lists, load, play and record without issue.

fm-maniac
Posts: 5
Joined: Thu Oct 11, 2018 6:59 am

Re: UNICABLE support

Post by fm-maniac » Sat Jan 26, 2019 10:02 am

Did we get any changes with Mosaic concerning UNICALBE?

So far it was not possible to set a a tuners UNICALBE configuration.

Just wondering....

bar.co
Posts: 3
Joined: Sat Sep 08, 2018 7:58 am

Re: UNICABLE support

Post by bar.co » Tue Feb 11, 2020 10:01 am

Any news about Unicable support? Unfortunately I cannot switch from DVBLink this way.

What a pity...

fm-maniac
Posts: 5
Joined: Thu Oct 11, 2018 6:59 am

Re: UNICABLE support

Post by fm-maniac » Tue Feb 11, 2020 11:29 am

Still the same here. But obviously it is no longer on the list... :?

sylvio2000
Posts: 7
Joined: Tue Oct 23, 2018 3:51 pm

Re: UNICABLE support

Post by sylvio2000 » Tue Feb 18, 2020 4:22 pm

I am using a Jultec Unicable Matrix which is connected to a DD Octopus Net (4 DVB-S tuners). TVMosaic runs on my Synology fine with 4 tuners. So unicable works.
I think you have to be more specific with your problems ;)

fm-maniac
Posts: 5
Joined: Thu Oct 11, 2018 6:59 am

Re: UNICABLE support

Post by fm-maniac » Wed Feb 19, 2020 6:42 am

There definitly is a problem with supporting UNICABLE systems. And that is that there's NO support of such systems!

I changed from DVBLink to TV Mosaik just to discover this fact. And it was confirmed by TV Mosaic development.

I'm not talking abou DiSEqC signals transmitted to position an antenna. I'm talking about DiSEqC signals transmitted to operated multiple receiver on one downline by downmixing to a set of IFs.

Post Reply