Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

TVMosaic live and recorded TV products for Desktop/NAS/Raspbery Pi
Post Reply
Cokeman
Posts: 3
Joined: Wed Apr 29, 2020 11:14 am

Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Cokeman » Wed Apr 29, 2020 11:17 am

Hello,

i have a QNAP TS 231 and want to install the App for my QNAP. I found this on the website, download it an then i copy this on the NAS. I install and after 2% from installprogram it break up with:

Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

this error.

Can anyone help me, whats the problem is? I have the current DRM version on NAS.

Sry for my bad english .... im from germany xD

Keefie
Posts: 4
Joined: Sat Mar 24, 2018 5:51 pm

Re: Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Keefie » Thu May 07, 2020 3:43 pm

I had the same problem with a QNAP TS-131. I opened a ticket last SEPTEMBER and despite sending several messages, I've not received a response.

I think the problem is that the download file is for a NAS with an ARM Marvel-based CPU and the TS-131/TS-231 has a Freescale™ ARM®v7 Cortex®-A9 dual-core 1.2GHz processor (different CPU).

I recently opened another ticket about this, but have received no response.

Not holding out any hope either.

Cokeman
Posts: 3
Joined: Wed Apr 29, 2020 11:14 am

Re: Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Cokeman » Sun May 10, 2020 9:42 am

That was the answer from the support:

"Please write here what the architecture of your NAS model (it should be indicated somewhere at the INfo section of the NAS UI)
Maybe you just need another installation file. For Intel Bases CPU's"

I scribe that i have a QNAP TS 231 ^^

After my answer i wait now 6 days and nothing ..... i remember the support and hope i get an answer ....

Keefie
Posts: 4
Joined: Sat Mar 24, 2018 5:51 pm

Re: Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Keefie » Mon May 11, 2020 12:07 pm

I gave them the full architecure back in September last year and did not receive a response.

The TS-131/TS231 does need another installation file, but it's not an Intel based CPU.

It's an ARM base architecture and I cannot find an installation file that works with the TS131/TS231.

Keefie
Posts: 4
Joined: Sat Mar 24, 2018 5:51 pm

Re: Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Keefie » Mon May 18, 2020 9:03 am

Finally got this reply from support:

Looks like your NAS has differ ARM architecture:
Installation file is for arm-x19
And could be that your NAS is arm-x31
Need a new build which could not be done in the near future.

So, no chance of getting TVMosaic running on a TS-131.

No longer a problem as I've got TVHeadend up and running.

Cokeman
Posts: 3
Joined: Wed Apr 29, 2020 11:14 am

Re: Wrong architecture: TVMosaic 1.0-17707 is built for arm-x19

Post by Cokeman » Sat May 23, 2020 10:35 pm

How you did you do that? i am too stupid for

Post Reply