Transponders blocked

[Oberon]

There are no extra drivers for TVButler on NAS. They are always included into the TVMosaic package installation.
n your case, there is no stream coming in. Which might be an interference effect from other software - either DVBLink or Plex. (I exclude the insufficient power from USB slot, because it was working with DVBLink previously, unless you changed USB ports).

[gonefishnet]

Hi Oberon,

i just got the notification there is a new (Windows) Version available on the Website
Platform: Windows PC
Version: 1.0.0 Build: 16296

But on every Computer i downloaded and installed/updated/even complete fresh install the overview page says Version 1.0.0. Build 16090

can this cause the issue ?
where is version 16296 ?

[Oberon]

You need to update both your sever and your client.

[gonefishnet]

You need to update both your sever and your client.

thanks, just updated all to the latest build but the issue still remains the same

[Oberon]

Quoting myself from the previous response.

In your case, there is no stream coming in. Which might be an interference effect from other software - either DVBLink or Plex. (I exclude the insufficient power from USB slot, because it was working with DVBLink previously, unless you changed USB ports).

[Homie]

Hey,
i have the same issue like gonefischnet.

• TV Server is installed on Qnap NAS, no plesk installed

• moved from DVBlink (works fine) to TVmosaic (successful, works fine, so DVBLinkk disabled and removed)

• Update to version 16296 (on server and also on client side)

• None channel works any longer, scanning for channel: 0

No Plesc, no DVBLink installed, no other new software in the meantime installed. Normal Samsung TV connected to this antenna has no issues,
Any hint why there is no stream coming in?

EDIT: attachment

[Oberon]

Any configuration changes? Any external USB hardware added?
Have you changed USB port of TVButler between DVBLink and TVMosaic?
Definitely no Plex installed?

[Homie]

Thank you for your hints.
No config change, no other USB device, no change of USB port and i never installed Plex.

BUT again with absolutely no change (just went shopping since last post ):
All channels are operating normal, also scanning for new channels looks normal.

Don't ask what's happen

[Hans Dampff]

Hello,
Recently, I have the same problem: In the search, all entries are "locked".

Until a few days TVMosaic worked without any problems. I did not change the hardware. The reception of the TV signal in the TV shows no interference.

I only use TVMosaic, no Plex, no DVBLogic. Removing the software on both the NAS and the Windows PC and reinstalling did not solve the problem.

Unfortunately, I found no solution in the forum.

Blockierte Sender.JPG (47.53 KiB) Viewed 3511 times

tvmosaic-log-20181104-1417.zip

(20.19 KiB) Downloaded 119 times

Hans

[Schmatze]

Hey there,

I've exactly the same issue here like Hans Dampff. Even though I've fully scan for channels multiple times, there were always nothing found respectivly all signals are locked.

I am using TVMosaic build 1705 on Windows 10 with the TVButler (DVB-C) running on my Synology NAS. Some times ago, all went well, but suddenly all channels are lost.

Can anybody help?

Greetings
Schmatze