STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

TVMosaic live and recorded TV products for Desktop/NAS/Raspbery Pi
Plantje
Posts: 61
Joined: Fri May 11, 2018 6:53 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by Plantje » Tue Aug 07, 2018 2:47 pm

I'm running Windows and NewCS. Then it is slightly different.

Open the file “dvbjcam.readers” and below the line:
“//cccam:ip:port:0/caid/mask:user:password”
add the following:
"newcamd:127.0.0.1:15050:1/0604/ffff:gebruiker1:wachtwoord1:0102030405060708090A0B0C0D0E"
Where 0604 is your card number and "gebruiker1" en "wachtwoord1" differ per tuner.

HomeNorway
Posts: 6
Joined: Tue Jul 31, 2018 8:02 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by HomeNorway » Fri Aug 10, 2018 7:29 pm

I have now removed the cccam part in my oscam.conf.
But still nothing, I have restarted OScam and TVMosair.

Maybe my TV card is not supported, can I check that some how?

Plantje
Posts: 61
Joined: Fri May 11, 2018 6:53 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by Plantje » Fri Aug 10, 2018 7:37 pm

Have you activated the trial or the license of TV Mosaic?

HomeNorway
Posts: 6
Joined: Tue Jul 31, 2018 8:02 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by HomeNorway » Tue Aug 14, 2018 10:33 pm

I’m running i trial mode for now.

Plantje
Posts: 61
Joined: Fri May 11, 2018 6:53 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by Plantje » Wed Aug 15, 2018 8:30 pm

And you have actually activated the trial?

HomeNorway
Posts: 6
Joined: Tue Jul 31, 2018 8:02 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by HomeNorway » Thu Aug 16, 2018 6:42 pm

Yes it is activated.

Plantje
Posts: 61
Joined: Fri May 11, 2018 6:53 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by Plantje » Thu Aug 16, 2018 8:17 pm

Ok, I'm sorry I don't have a solution. In my case the fact that I had not activated the license nor the trial was causing the fact that nothing was decrypted.

Do you have an option to watch free to air channels? Do those run? Just to make sure TV Mosaic is running fine...

HomeNorway
Posts: 6
Joined: Tue Jul 31, 2018 8:02 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by HomeNorway » Fri Aug 17, 2018 7:02 pm

Yes I have one free Channel, and that works.
I have contacted my tv provider, and we’re trying to get a new decrypting TV card. Just to make sure there’s nothing wrong with the TV card.

Plantje
Posts: 61
Joined: Fri May 11, 2018 6:53 am

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by Plantje » Fri Aug 17, 2018 7:04 pm

Do you have no other option to test the card? In my setup I have to use a card at least every three months. Otherwise it will stop working and I have to put it in a certified receiver and reset the card on a website.

muppets4
Posts: 26
Joined: Sun Jun 03, 2018 9:12 pm

Re: STEP BY STEP TUTORIAL OSCAM, DVBJCAM & TVMOSAIC

Post by muppets4 » Fri Aug 24, 2018 11:55 am

Plantje wrote:
Fri Aug 17, 2018 7:04 pm
Do you have no other option to test the card? In my setup I have to use a card at least every three months. Otherwise it will stop working and I have to put it in a certified receiver and reset the card on a website.
Sounds like CaiWay (:

I had this too using Newcs/Acamd and a Smargo smartmouse. Every months I had to 'reset' the cards, because CaiWay thought it was inactive. I don't know why, but after I ditched the Smargo and started using a TBS Smartmouse (https://www.tbsdtv.com/products/tbs3102 ... eader.html) this behaviour stopped.

Post Reply