Page 2 of 3

Re: TVMosaic and OSCam with LibreELEC

Posted: Tue Apr 17, 2018 9:23 am
by Bjur
awiouy wrote:
Thu Mar 29, 2018 4:38 pm
In tvh there is an option to map only usable channels, ie neither service (eg humax, cisco...), nor undecryptable channels. Does that correspond to free channels in TVMosaic?

By the way, TVMosaic works fine with an anysee tuner, but it seems to start too early for TVButler. To watch TV channels, I need to recycle (stop/start) TVMosaic after a LibreeLEC reboot. I will send a log when I get back to my system (might take a while due to ishtar).

Anyway, I am really impressed with TVMosaic, and look forward to making it a seamless installation for LibreELEC.
Hi awiouy. I'm currently using TVHeadend + Oscam. Have you written the guide for TVMosaic yet, since I'm hoping for a working solution also on this:)
Thanks for your help.

Re: TVMosaic and OSCam with LibreELEC

Posted: Fri Jun 29, 2018 9:58 pm
by dude-nl
awiouy wrote:
Thu Mar 29, 2018 10:09 am
It works, thanks!

I will write a wiki page how to configure TVMosaic with OSCam on LibreELEC and write an addon.

Is there any way to automatically remove service/undecryptable channels?
Can you please tell me where to put the dvbjcam files on the Rpi running libreelec.
I can't get decryption to work.
FTA is running flawless

Re: TVMosaic and OSCam with LibreELEC

Posted: Sat Jun 30, 2018 8:16 am
by awiouy
Thank you for the feedback.

Addon configuration is in /storage/.kodi/userdata/addon_data/service.tvmosaic.
It is also accessible via smb at \\libreelec.local\userdata\addon_data\service.tvmosaic

Device configuration is in service.tvmosaic/shared.inst/devices.
Place dvbjcam files there, as documented elsewhere in this forum.

Re: TVMosaic and OSCam with LibreELEC

Posted: Sat Jun 30, 2018 9:20 am
by dude-nl
awiouy wrote:
Sat Jun 30, 2018 8:16 am
Thank you for the feedback.

Addon configuration is in /storage/.kodi/userdata/addon_data/service.tvmosaic.
It is also accessible via smb at \\libreelec.local\userdata\addon_data\service.tvmosaic

Device configuration is in service.tvmosaic/shared.inst/devices.
Place dvbjcam files there, as documented elsewhere in this forum.
thanks for your reply.
I did but it doesn't decrypt.
I have a lot of experience with oscam/cccam etc and am running services for years.
Tried:
newcamd
cccam
Both are not connecting to my Oscam server.

How can I check if dvbjcam is running? If I check the logs (oscam server and dvbjcam log) nothing about decrypting is showing up

Re: TVMosaic and OSCam with LibreELEC

Posted: Sun Jul 01, 2018 8:14 am
by awiouy
Meh... My reply assumed you are using the add-on and not the manual install.
If you have installed tvmosaic manually, the devices are in /storage/tvmosaic.data/devices.
Do not forget to also copy dvbjcam.so

Re: TVMosaic and OSCam with LibreELEC

Posted: Mon Jul 02, 2018 6:46 am
by dude-nl
I got it running.

But CPU usages spikes to 100% when decrypting.

Tried it on:
Libreelec 9.0 (from the forum with the TV mosaic addon)
and
Openelec with the manual installation.

Strange because if I run TVH with DVBAPI it decrypts and plays without problems.
Is TV mosaic heavier with decrypting then TVH?

I'm using a Rpi2 and as said, with TVH no problems (but I like TVM better because of the player/gui)

Re: TVMosaic and OSCam with LibreELEC

Posted: Mon Jul 02, 2018 8:40 am
by Oberon
Yes, it may be that TVMosaic is more demanding on decrypting channel. It was originally made for x86 systems, where this is less visible.
We have this item on our todo list, but it is not clear yet when it will be picked up.

Re: TVMosaic and OSCam with LibreELEC

Posted: Mon Jul 02, 2018 7:17 pm
by dude-nl
Thanks for your reply.

Is there some small Pi-like device that runs TVM fine?
I have a DS213J (not the fastest NAS), to bad my usb tuner is not supported on my NAS, otherwise I used that.

Last option is just to keep using TVH :(

Re: TVMosaic and OSCam with LibreELEC

Posted: Tue Jul 03, 2018 5:55 am
by Oberon
AFAIK, awiouy runs openelec with decryption on RPi3. Apparently it does this better.
In any case we are looking into the performance issue and will let you know if we have any additional info on it.

Re: TVMosaic and OSCam with LibreELEC

Posted: Fri Jul 06, 2018 9:27 am
by Oberon
We have a couple of test builds for Raspberry Pi with softcam decrypting performance improvements.
Is there anyone here willing to test?..